CAT CAMS Camshafts 1013652/C Audi ADR atmo enginesI-4cyl 1.8L 20v DOHC (DTH/DTH)

640.00 Χωρίς ΦΠΑ

For ‘conventional’ applications where pricing is important , Cat Cams offers a vast range of high quality chilled cast iron camshafts. Typical applications are fast road and moderate competition camshafts. Development of a casting requires high production volumes, so these are only available for a limited number of big volume applications.

When castings are not (yet) available, the steel billet production line at Cat Cams brings the answer: the development cycle for the BMW Mini R56 Turbo engine was about 6 weeks from arrival of the sample parts. The work included design and manufacturing of steel billet camshafts (see picture below), cam profile design and development of a dual valve spring kit.

For more demanding applications such as dedicated competition projects, the steel billet production line gets in action as well. Beside casting availability, there are some other reasons to prefer steel billet camshafts: gun drilling a 20mm hole over a length of 400mm saves about 1kg. Thanks to this reduction, the weight of Cat Cams steel billets rivals assembled hollow lightweight camshafts. However, the advantage of these ‘single piece’ steel billets is an important improvement in stiffness and strength, allowing higher acceleration cam profiles.

1 σε απόθεμα

Κωδικός προϊόντος: 1013652 Κατηγορίες: , , , , , , , Ετικέτες: , , , ,

Περιγραφή

Click for 1013652  information

1013652
hot street – dirt track
Audi ADR atmo engines
I-4cyl 1.8L 20v DOHC (DTH/DTH)
Set
                                                                                                 
                                          intake               exhaust
camshaft data:
lash ramp                         : hydro                hydro
duration @ 0.1mm          : 268°                   282°
duration @ 1.0mm          : 227°                   233°
valve lift                           : 9.25mm             11.00mm
cam  lift
lobe angle                       : 110°                   108°
timing @ 1.0mm             : 4° / 43°              45° / 8°
valve lift @ TDC              : 1.35mm             1.95mm
fitted load / length         : 19kg @ 34.6mm      : 29kg @ 33.1mm
max. load / lift                : 53kg @ 10.0mm      : 63kg @ 11.0mm
REMARKS :
#
– chilled cast iron camshafts
– supplied with adjustable chain sprocket on the exhaust cam to optimize intake cam timing
(also available with 2 non adjustable chain sprockets at reference cam timing: partnumber 10156xx hydraulic or 10157xx mechanical)
#
ONLY for dirt track applications and pro street use with adjustable engine management or carburettors
AVAILABLE ONLY ON REQUEST

Επιπλέον πληροφορίες

Ταιριάζει στις εξής μάρκες

,

Κατασκευαστής

Εφαρμογή

ΑΠΟΣΤΟΛΗ ΠΡΟΪΟΝΤΟΣ

Ρωτήστε μας για διαθεσιμότητα.

Μπορεί επίσης να σας αρέσει…