CAT CAMS Camshafts 1013778/C Audi I-4cyl 1.8L 20v DOHC

640.00 Χωρίς ΦΠΑ

For ‘conventional’ applications where pricing is important , Cat Cams offers a vast range of high quality chilled cast iron camshafts. Typical applications are fast road and moderate competition camshafts. Development of a casting requires high production volumes, so these are only available for a limited number of big volume applications.

When castings are not (yet) available, the steel billet production line at Cat Cams brings the answer: the development cycle for the BMW Mini R56 Turbo engine was about 6 weeks from arrival of the sample parts. The work included design and manufacturing of steel billet camshafts (see picture below), cam profile design and development of a dual valve spring kit.

For more demanding applications such as dedicated competition projects, the steel billet production line gets in action as well. Beside casting availability, there are some other reasons to prefer steel billet camshafts: gun drilling a 20mm hole over a length of 400mm saves about 1kg. Thanks to this reduction, the weight of Cat Cams steel billets rivals assembled hollow lightweight camshafts. However, the advantage of these ‘single piece’ steel billets is an important improvement in stiffness and strength, allowing higher acceleration cam profiles.

Διαθέσιμο κατόπιν παραγγελίας

Κωδικός προϊόντος: 1013778 Κατηγορίες: , , , , , , Ετικέτες: , , ,

Περιγραφή

1013778/C information

– chilled cast iron camshafts
tarmac rally-race
Set
Audi AEB, AWT turbo engines
I-4cyl 1.8L 20v DOHC (DTH/DTH)
                                         intake               exhaust
camshaft data:
lash ramp                         : 0.20mm             0.25mm
duration @ 0.1mm          : 282°                   269°
duration @ 0.1mm          : 240°                   222°
valve lift                           : 10.20mm           10.50mm
cam  lift
lobe angle                       : 110°                   120°
timing @ 1.0mm             : 10° / 50°              51° / -9°
valve lift @ TDC              : 2.15mm             0.55mm
fitted load / length         : 23kg @ 34.5mm      : 36kg @ 31.1mm
max. load / lift                : 69kg @ 12.0mm      : 98kg @ 12.0mm
REMARKS :
#check distance between valve seal and retainer to be at least 0.6mm at full lift
AVAILABLE ONLY ON REQUEST

Επιπλέον πληροφορίες

Ταιριάζει στις εξής μάρκες

Κατασκευαστής

Εφαρμογή

,

ΑΠΟΣΤΟΛΗ ΠΡΟΪΟΝΤΟΣ

Ρωτήστε μας για διαθεσιμότητα.